Industry news, product and service guides and company updates.
Technical Guides 4 min
An enquiry that begins with the right technical information enables faster matching, meaningful sample trials and compar…
Technical Guides 4 min
Vacuum leaks often originate not at the pump but from poor selection or application of film, sealant tape, connectors, h…
Technical Guides 4 min
PMI foam is considered for UAV and defence parts for dimensional stability under heat/pressure, low creep and lightweigh…
Technical Guides 4 min
Hull, deck, stringers and interior panels do not require the same core. PVC, balsa, PET, PU hybrid and honeycomb are sel…
Technical Guides 4 min
Peel ply prepares the surface, release film controls separation/bleed, and flow mesh carries resin in-plane. They are no…
Technical Guides 4 min
Vacuum-bagging film is selected for maximum cure temperature, ramp, dwell, exotherm, elongation and sealant-tape compati…
Technical Guides 4 min
Nomex/aramid honeycomb is considered for aerospace, defence, rail and marine structures where low weight, high specific…
Technical Guides 4 min
Grooves, perforations, contour cuts, bonding and edge details affect PVC foam resin use, surface quality and sandwich-pa…
Technical Guides 4 min
UTTS installation requires matching cartridge ratio, gun plunger, static mixer and adhesive working time as one system.
