+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

BergoLED Speed-Repair Putty 4L1000

BergoLED Speed-Repair Putty 4L1000 — representative product illustration BERGOLIN

Product Code: SDF-WND-081

BergoLED Speed-Repair Putty 4L1000: Solvent-free repair putty cured in seconds by a suitable 395 nm LED UV lamp for epoxy and polyester GRP repairs.

Why does it matter?

Wind-blade coating and repair require joint control of substrate preparation, film thickness, ambient conditions and cure source.

Application and selection checklist

  • Sand and clean the GRP surface according to the current TDS.
  • Measure temperature, humidity and dew point.
  • Verify mix ratio or LED wavelength.
  • Record film thickness and cure indicator.

For product matching, samples and quotation, see the regional wind-energy supply guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Product type LED UV-curable repair putty
Binder Polyurethane acrylate
Density at 20°C Approx. 1.09 g/cm³
Solids by weight Approx. 99.94%
Application Spatula
Pot life Unlimited; protect from light
Cure indicator Sandable when the red colour has completely disappeared
Shelf life Approx. 12 months

Areas of Use

GRP/CFRP surface repair

Wood, steel, glass and ABS

Rapid wind-blade repair

Filling and local surface correction

Advantages

LED UV cure in seconds

Solvent-free formulation

Direct reworking after cure

Strong adhesion to epoxy and polyester GRP

Unlimited pot life; protect from light

S.S.S

Frequently Asked Questions

Which application suits BergoLED Speed-Repair Putty 4L1000?
Solvent-free repair putty cured in seconds by a suitable 395 nm LED UV lamp for epoxy and polyester GRP repairs. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products