TIKAL – ADHESIVES & SEALANTS
TIKAL Tef-Gel® Anti-Corrosion Compound
Water-resistant PTFE-based paste that helps prevent galvanic corrosion between dissimilar…
Request a Quote
View
Tikalflex PCW 14
Product Code: SDF-MAR-077
Tikalflex PCW 14: UV-resistant low-modulus marine silicone for polycarbonate, acrylic and glass boat windows.
Why does it matter?
Marine bonding and sealing must consider UV, salt water, substrate movement and surface chemistry together; no single product suits every substrate.
Application and selection checklist
- Remove grease, dust and weak layers.
- Check restrictions for PE, PP, PTFE and bituminous surfaces.
- Verify joint geometry and minimum thickness.
- Select the correct product for continuous water/UV exposure.
For product matching, samples and quotation, see the boat and yacht materials guide.
Technical Details
Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.
Technical Specifications
| Chemical base | Polysiloxane |
|---|---|
| Application temperature | 5–35°C |
| Skin formation at 23°C / 55% RH | 15 minutes |
| Cure in 24 h | 2 mm |
| Temperature resistance after cure | −40 to +180°C |
| Hardness | Shore A 20 |
| Maximum tensile stress | 1.5 N/mm² |
| Elongation at break | >600% |
Areas of Use
Polycarbonate and acrylic windows
Glass boat windows
Wood, metal and GRP frames
Flexible marine glazing seals
Advantages
High UV resistance
Permanent elasticity
No stress cracking on prestressed acrylic or polycarbonate
Low odour
IMO MarED tested
S.S.S
Frequently Asked Questions
Which application suits Tikalflex PCW 14?
UV-resistant low-modulus marine silicone for polycarbonate, acrylic and glass boat windows. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products
All Products
Products You May Like
TIKAL – ADHESIVES & SEALANTS
TIKAL – ADHESIVES & SEALANTS
TIKALFLEX Contact 12
One-component weather-resistant MS-polymer adhesive and sealant for interior and exterior…
Request a Quote
View
TIKAL – ADHESIVES & SEALANTS
TIKALFLEX Clear 10
Clear one-component MS-polymer adhesive and sealant for interior marine joints.
Request a Quote
View
TIKAL – ADHESIVES & SEALANTS
Tikalflex PCW 14
UV-resistant low-modulus marine silicone for polycarbonate, acrylic and glass boat windows…
Request a Quote
View
TIKAL – ADHESIVES & SEALANTS
TIKALFLEX TSC plus – Deck Caulking
One-part UV- and salt-water-resistant caulking sealant for teak-deck joints.
Request a Quote
View
TIKAL – ADHESIVES & SEALANTS
TLB Flex – Teak Levelling & Flexible Bonding
Flexible MS-hybrid-polymer adhesive for bonding teak, panels, cork and synthetic decking t…
Request a Quote
View