+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

TIKALFLEX Contact 12

TIKALFLEX Contact 12 — representative product illustration TIKAL – ADHESIVES & SEALANTS

Product Code: SDF-MAR-075

TIKALFLEX Contact 12: One-component weather-resistant MS-polymer adhesive and sealant for interior and exterior marine joints.

Why does it matter?

Marine bonding and sealing must consider UV, salt water, substrate movement and surface chemistry together; no single product suits every substrate.

Application and selection checklist

  • Remove grease, dust and weak layers.
  • Check restrictions for PE, PP, PTFE and bituminous surfaces.
  • Verify joint geometry and minimum thickness.
  • Select the correct product for continuous water/UV exposure.

For product matching, samples and quotation, see the boat and yacht materials guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Chemical base MS polymer
Application temperature 0–40°C
Skin formation at 23°C / 55% RH 15 minutes
Cure in 24 h at 23°C / 55% RH 2 mm
Temperature resistance after cure −40 to +90°C
Hardness Shore A 60
Tensile strength 2.3 N/mm²
Elongation at break 350%

Areas of Use

Yacht and boat joints

Glass, metal, GRP and carbon

Polystyrene and wood

Humid-environment applications

Advantages

Solvent- and isocyanate-free

Permanent elasticity

Sandable and paintable

Primerless adhesion to many surfaces

±25% movement capability

S.S.S

Frequently Asked Questions

Which application suits TIKALFLEX Contact 12?
One-component weather-resistant MS-polymer adhesive and sealant for interior and exterior marine joints. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products