+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

BergoLED Speed-Resin 1L1000-O (Outdoor)

BergoLED Speed-Resin 1L1000-O (Outdoor) — representative product illustration BERGOLIN

Product Code: SDF-WND-082

BergoLED Speed-Resin 1L1000-O (Outdoor): One-component laminating resin cured in seconds by 395 nm LED UV, with extended outdoor working time.

Why does it matter?

Wind-blade coating and repair require joint control of substrate preparation, film thickness, ambient conditions and cure source.

Application and selection checklist

  • Sand and clean the GRP surface according to the current TDS.
  • Measure temperature, humidity and dew point.
  • Verify mix ratio or LED wavelength.
  • Record film thickness and cure indicator.

For product matching, samples and quotation, see the regional wind-energy supply guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Binder Polyurethane acrylate
LED wavelength 395 nm
Glass-transition temperature 97.5°C
HDT 73.51°C
Tensile strength 69.17 MPa (Type 1A)
Tensile modulus 3180 MPa (Type 1A)
Flexural strength 112.8 MPa
Hardness Shore D 88

Areas of Use

GRP lamination and repair

On-site wind-blade repair

Rapid LED UV curing

Controlled outdoor composite repair

Advantages

Solvent-free and one component

Cures in seconds

Immediately overcoatable

High resistance to yellowing

Up to five minutes working time in direct sunlight

S.S.S

Frequently Asked Questions

Which application suits BergoLED Speed-Resin 1L1000-O (Outdoor)?
One-component laminating resin cured in seconds by 395 nm LED UV, with extended outdoor working time. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products