+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

TIKALFLEX TSC plus – Deck Caulking

TIKALFLEX TSC plus – Deck Caulking — representative product illustration TIKAL – ADHESIVES & SEALANTS

Product Code: SDF-MAR-078

TIKALFLEX TSC plus – Deck Caulking: One-part UV- and salt-water-resistant caulking sealant for teak-deck joints.

Why does it matter?

Marine bonding and sealing must consider UV, salt water, substrate movement and surface chemistry together; no single product suits every substrate.

Application and selection checklist

  • Remove grease, dust and weak layers.
  • Check restrictions for PE, PP, PTFE and bituminous surfaces.
  • Verify joint geometry and minimum thickness.
  • Select the correct product for continuous water/UV exposure.

For product matching, samples and quotation, see the boat and yacht materials guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Chemical base Advanced silane polymer
Skin formation 5–10 minutes
Tack-free time Approx. 30 minutes
Cure speed at 25°C / 65% RH Approx. 3 mm/24 h
Hardness Shore A 35
Tensile strength Approx. 1.7 N/mm²
Elongation at break 670%
Temperature resistance −30 to +150°C

Areas of Use

Teak-deck joints

Boat and yacht decks

Joints exposed to UV and salt water

Sandable marine seams

Advantages

No primer required; primer must not be used

Flexible non-shrinking formulation

Bubble-free cure

Sandable after cure

Salt-water and UV resistance

S.S.S

Frequently Asked Questions

Which application suits TIKALFLEX TSC plus – Deck Caulking?
One-part UV- and salt-water-resistant caulking sealant for teak-deck joints. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products