+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

SDF116B PUR ADHESIVE 20 MIN

SDF116B PUR ADHESIVE 20 MIN ADHESIVES

Product Code: SDF-ADH-072

SDF116B PUR ADHESIVE 20 MIN: Black thixotropic two-component PUR adhesive with 20-minute working time for multi-material structural bonding.

Why does it matter?

Adhesive selection must consider mix ratio, working time, surface preparation, bond gap and cure cycle—not chemistry alone.

Application and selection checklist

  • Remove oil, moisture, dust and weak layers from the surface.
  • Measure A:B using the weight/volume basis stated in the TDS.
  • Control pot life, part mass and exotherm together.
  • Trial the actual substrate before serial production.

For product matching, samples and quotation, see the technical supply and sampling process.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Mix ratio by volume 100:100
Pot life at 25°C / 100 g 20 minutes
Cure condition 24 h at 25°C
Mixed viscosity at 25°C 40,000 Pa·s
Tensile strength 25 N/mm²
Elongation 15%
Hardness Shore D 80
Service temperature −36 to +100°C

Areas of Use

Thermosets and thermoplastics

Steel and aluminium

Concrete, wood and glass

Industrial panels and assembly

Advantages

20-minute working time

Thixotropic mixture

Room-temperature cure

Multi-material adhesion

Elasticity suitable for impact absorption

S.S.S

Frequently Asked Questions

Which application suits SDF116B PUR ADHESIVE 20 MIN?
Black thixotropic two-component PUR adhesive with 20-minute working time for multi-material structural bonding. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products