+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

Bergolin 1-Component Topcoat 6P1600

Bergolin 1-Component Topcoat 6P1600 BERGOLIN

Product Code: SDF-WND-071

Bergolin 1-Component Topcoat 6P1600: Water-dilutable fast-drying one-component polyacrylate topcoat for wind-turbine rotor blades.

Why does it matter?

Wind-blade coating and repair require joint control of substrate preparation, film thickness, ambient conditions and cure source.

Application and selection checklist

  • Sand and clean the GRP surface according to the current TDS.
  • Measure temperature, humidity and dew point.
  • Verify mix ratio or LED wavelength.
  • Record film thickness and cure indicator.

For product matching, samples and quotation, see the regional wind-energy supply guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Binder Polyacrylate
Density at 20°C Approx. 1.24 g/cm³ (colour dependent)
Solids by weight Approx. 61% (colour dependent)
Viscosity at 20°C Approx. 1100 mPa·s
Roller thinning Max. 15% water
Spray thinning Max. 5% water
Theoretical consumption Approx. 127 g/m² at 50 µm dry film
Application temperature >5°C

Areas of Use

GRP wind blades

Roller application

Air-mix or cup-gun spraying

Surfaces exposed to mechanical and chemical stress

Advantages

One-component use

Water dilutable

Fast drying

Mechanical/chemical resistance

Colour stability

S.S.S

Frequently Asked Questions

Which application suits Bergolin 1-Component Topcoat 6P1600?
Water-dilutable fast-drying one-component polyacrylate topcoat for wind-turbine rotor blades. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products