+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

SDF1210A/83-8B Epoxy Resin

SDF1210A/83-8B Epoxy Resin ADHESIVES

Product Code: SDF-ADH-032

SDF1210A/83-8B Epoxy Resin: Solvent-free 1:1 epoxy system for high-temperature bonding, potting, winding, pultrusion and lamination.

Why does it matter?

Adhesive selection must consider mix ratio, working time, surface preparation, bond gap and cure cycle—not chemistry alone.

Application and selection checklist

  • Remove oil, moisture, dust and weak layers from the surface.
  • Measure A:B using the weight/volume basis stated in the TDS.
  • Control pot life, part mass and exotherm together.
  • Trial the actual substrate before serial production.

For product matching, samples and quotation, see the technical supply and sampling process.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Mix ratio by weight 100:100
Pot life at 25°C / 100 g 30 minutes
Cure condition at 25°C 4–6 hours
Long-term temperature resistance 120–130°C
TDS temperature-resistance range 220–230°C
Hardness Shore D 80
Shrinkage <0.5%
Aluminium 6061 lap shear at 23°C 21.5 MPa

Areas of Use

Bonding ceramics and quartz

Motor and high-power-transformer potting

Carbon/glass-fibre winding and pultrusion

Lamination and prepreg processes

Advantages

Room-temperature curing

120–130°C long-term temperature resistance

Water and UV resistance

High mechanical strength

Broad composite-process applicability

S.S.S

Frequently Asked Questions

Which application suits SDF1210A/83-8B Epoxy Resin?
Solvent-free 1:1 epoxy system for high-temperature bonding, potting, winding, pultrusion and lamination. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products