+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

SDF181A/B-S Epoxy Adhesive

SDF181A/B-S Epoxy Adhesive ADHESIVES

Product Code: SDF-ADH-030

SDF181A/B-S Epoxy Adhesive: Solvent-free 1:1 epoxy adhesive for bonding and potting exposed to impact and vibration.

Why does it matter?

Adhesive selection must consider mix ratio, working time, surface preparation, bond gap and cure cycle—not chemistry alone.

Application and selection checklist

  • Remove oil, moisture, dust and weak layers from the surface.
  • Measure A:B using the weight/volume basis stated in the TDS.
  • Control pot life, part mass and exotherm together.
  • Trial the actual substrate before serial production.

For product matching, samples and quotation, see the technical supply and sampling process.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Mix ratio by weight 100:100
Pot life at 25°C / 100 g 10–15 minutes
Cure condition 6 h at 25°C or 2–3 h at 60°C
Hardness Shore D 80–82
Heat resistance 105°C
Water absorption, 24 h / 25°C <0.03%
Shrinkage <0.35%
Tensile strength 22 kg/mm²

Areas of Use

Bonding metal, ceramic and glass

Electronic-component potting

Rubber and fibre products

Validated food-contact-product applications

Advantages

Solvent-free system

Impact and vibration resistance

Resistance to corrosion and temperature change

Low water absorption

Room-temperature cure

S.S.S

Frequently Asked Questions

Which application suits SDF181A/B-S Epoxy Adhesive?
Solvent-free 1:1 epoxy adhesive for bonding and potting exposed to impact and vibration. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products