+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

TLB Flex – Teak Levelling & Flexible Bonding

TLB Flex – Teak Levelling & Flexible Bonding — representative product illustration TIKAL – ADHESIVES & SEALANTS

Product Code: SDF-MAR-079

TLB Flex – Teak Levelling & Flexible Bonding: Flexible MS-hybrid-polymer adhesive for bonding teak, panels, cork and synthetic decking to metal, composite or wood.

Why does it matter?

Marine bonding and sealing must consider UV, salt water, substrate movement and surface chemistry together; no single product suits every substrate.

Application and selection checklist

  • Remove grease, dust and weak layers.
  • Check restrictions for PE, PP, PTFE and bituminous surfaces.
  • Verify joint geometry and minimum thickness.
  • Select the correct product for continuous water/UV exposure.

For product matching, samples and quotation, see the boat and yacht materials guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Chemical base MS hybrid polymer
Application temperature 10–35°C
Skin time at 23°C / 55% RH 45 minutes
Cure in 24 h 2 mm
Load bearing After 15 hours
Temperature resistance after cure −30 to +90°C
Hardness Shore A 55
Shear strength 1.4 N/mm²

Areas of Use

Teak-deck bonding

Cork and synthetic deck coverings

Panel installation

Metal, CFRP/GRP and wood substrates

Advantages

Open time up to 45 minutes

Solvent- and isocyanate-free

Primerless multi-substrate adhesion

Flexible bubble-free cure

Moisture curing

S.S.S

Frequently Asked Questions

Which application suits TLB Flex – Teak Levelling & Flexible Bonding?
Flexible MS-hybrid-polymer adhesive for bonding teak, panels, cork and synthetic decking to metal, composite or wood. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products