UTTS installation requires matching cartridge ratio, gun plunger, static mixer and adhesive working time as one system.
Short answer
A 50 mL 1:2 UTTS applicator must be used only with matching volume/ratio and compatible A/B cartridge geometry. The wrong gun ratio can disturb mixing and cause incomplete cure.
Why does it matter?
Installation pressure in the field can lead to skipped purge, surface cleaning or open-time control. Standardise equipment and work instructions for repeatability.
Correct system matching
The cartridge ratio, gun mechanism and mixer connection must belong to the same system family.
- 50 mL cartridge volume
- 1:2 mix ratio
- Compatible A/B system geometry
- Matching static mixer and initial purge
Application control
Record surface cleaning, material temperature, mix homogeneity and fixture time.
Frequently asked questions
Can a 1:1 gun dispense a 1:2 cartridge?
No. The plunger movement gives the wrong resin/hardener ratio.
Must the static mixer be changed every time?
A mixer in which cure has started must not be reused; replacement depends on open time and stoppage duration.
Conclusion and technical support
Review the matched equipment on the UTTS gun page.
Sources
- Ürün kartuş ve yapıştırıcı teknik föyleri