+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

50 mL 1:2 UTTS Dual-Component Dispensing Gun

50 mL 1:2 UTTS Dual-Component Dispensing Gun ADHESIVE DISPENSING GUNS

Product Code: SDF-GUN-038

50 mL 1:2 UTTS Dual-Component Dispensing Gun: Manual gun for 50 mL, 1:2 dual-component cartridges, including UTTS adhesive applications.

Why does it matter?

Cartridge volume alone is insufficient. Cartridge system, mix ratio, plunger geometry and static mixer must be fully compatible.

Application and selection checklist

  • Verify the material cartridge system and ratio.
  • Select the matching plunger and static mixer together.
  • Purge initial material until colour/flow is homogeneous.
  • Do not leave cured material in the applicator.

For product matching, samples and quotation, see the dispensing-equipment selection.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Drive type Manual
Cartridge volume 50 mL
Mix ratio 1:2
System Dual-component cartridge
Target application UTTS and industrial bonding

Areas of Use

Industrial production

Controlled application

Sample and serial-production validation

Advantages

Controlled application with the correct system

Repeatable process support

Technical matching capability

S.S.S

Frequently Asked Questions

Which application suits 50 mL 1:2 UTTS Dual-Component Dispensing Gun?
Manual gun for 50 mL, 1:2 dual-component cartridges, including UTTS adhesive applications. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products