Industry news, product and service guides and company updates.
Technical Guides 4 min
PMI, PVC, PU and honeycomb cores may all be “lightweight cores”, but occupy different decision spaces for temperature, p…
Technical Guides 4 min
Towpreg and wet winding may produce the same geometry, but differ in when and how resin reaches the fibre, process contr…
Technical Guides 4 min
Surface energy affects how readily an adhesive wets a substrate. Cleaning, abrasion and suitable pretreatment must be ma…
Technical Guides 4 min
Release-film selection depends on perforation, service temperature, resin system and bleeder requirement. The wrong film…
Technical Guides 4 min
“Five minutes” alone is not enough when selecting rapid MMA or epoxy adhesives; fixture time, working time, gap and subs…
Technical Guides 4 min
Epoxy-bond performance depends less on the resin name than on coordinated surface preparation, mix ratio, bond-line thic…
Technical Guides 4 min
PVC foam balances low weight and stiffness in marine, wind and industrial sandwich structures when density, thickness, r…
