+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

Multiaxial Glass Fiber Fabrics

Multiaxial Glass Fiber Fabrics FIBRE REINFORCEMENTS

Product Code: SDF-FIB-011

Multiaxial Glass Fiber Fabrics: Non-crimp glass-fibre reinforcement configurable as UD, biaxial, bidirectional, triaxial or quadraxial for load paths.

Why does it matter?

Reinforcement architecture determines how efficiently fibres align with loads and how resin travels through the laminate.

Application and selection checklist

  • Define load directions and target areal weight.
  • Validate the angle stack with laminate calculations.
  • Check permeability and drape on a trial.
  • Verify resin/reinforcement compatibility.

For product matching, samples and quotation, see the fibre architecture and orientation guide.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Basic constructions UD, 90°/0°, ±45°, ±45°/0°, 90°/±45°, ±45°/90°/0°
Maximum width 3810 mm
Maximum areal weight 4000 g/m²
Angle customisation Options within ±22.5° of standard axes
Resin compatibility Epoxy, UP, vinyl ester, PUR, PP, PA, caprolactam
Certification DNV GL type approval (manufacturer brochure)

Areas of Use

Infusion and RTM

Pultrusion and filament winding

Prepreg and compression

Hand lay-up

Marine, wind and transport components

Advantages

Fibre placement aligned to load paths

High mechanical efficiency from straight fibres

High weights that may reduce layer count

Tailored drape and permeability

Multi-resin compatibility

S.S.S

Frequently Asked Questions

Which application suits Multiaxial Glass Fiber Fabrics?
Non-crimp glass-fibre reinforcement configurable as UD, biaxial, bidirectional, triaxial or quadraxial for load paths. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products