FIBRE REINFORCEMENTS
Multiaxial Carbon Fiber Fabrics
Stitched multiaxial reinforcement family made with Zoltek PX35 50K carbon fibre and availa…
Request a Quote
View
Biaxial 0°/90° Carbon Fibre Fabric 200 GSM
Product Code: SDF-FIB-B90-200
Biaxial 0°/90° Carbon Fibre Fabric 200 GSM combines 0° and 90° reinforcement in a balanced layer for axial tensile and bending loads.
Why does it matter?
Nominal carbon areal weight is 200 g/m², while total product areal weight including stitching is 207 g/m². Nominal carbon GSM and total product GSM should not be confused in purchasing or laminate calculations.
When selecting
- Confirm load directions and the target stacking sequence.
- Assess the resin system, process and target fibre volume fraction together.
- Allow for the 127 cm standard width and roll length in the cutting plan.
- Use the current TDS on this page for final values.
Compare alternative orientations and weights in the carbon fibre fabric selection guide.
Technical Details
According to the manufacturer TDS, the product uses industrial 50K Zoltek PX35 carbon fibre, 76 dtex polyester stitching, 2.8 mm stitch length and E5 stitch gauge. Standard width is 127 cm; the stated custom-width option up to 2.54 metres must be confirmed before order.
Technical Specifications
| Product code | SKY200ZN-127T5Z |
|---|---|
| Reinforcement architecture | Biaxial (two-direction) |
| Fibre orientation | 0° / 90° |
| Nominal carbon areal weight | 200 g/m² |
| Stitching-yarn areal weight | 7 g/m² |
| Total product areal weight | 207 g/m² |
| Total areal-weight tolerance | 195–219 g/m² |
| Carbon fibre type | Industrial 50K, Zoltek PX35 |
| Stitch pattern | Tricot |
| Stitch length / gauge | 2.8 mm / E5 |
| Stitch material | Polyester 76 dtex |
| Standard roll width | 127 cm |
| Roll length | 50 or 100 m |
Areas of Use
Wind energy
Automotive and motorsport
Aerospace and defence
Marine structures
Rail systems
Industrial composite parts
Advantages
TDS-verified areal weight and tolerance
Controlled fibre placement by load direction
Low-crimp stitched construction
Multiple orientations in one lay-up
127 cm standard width
S.S.S
Frequently Asked Questions
What does 200 GSM mean?
It is the total nominal areal weight of the carbon layers. Including polyester stitching, total TDS areal weight is 207 g/m² with a tolerance range of 195–219 g/m².
Which loads suit this fibre orientation?
Combines 0° and 90° reinforcement in a balanced layer for axial tensile and bending loads. The final stacking sequence must be verified by engineering calculations and production trials.
Which composite processes can use this reinforcement?
It may be considered for resin infusion, vacuum bagging, RTM and suitable wet-lay-up processes. Resin wet-out and process compatibility must be confirmed by testing.
Similar Products
All Products
Products You May Like
FIBRE REINFORCEMENTS