PEEL PLY
210°C Heat Resistant Peel Ply
High-Performance Nylon 6 Peel Ply for Composite Applications The 210°C Heat Resistant Peel…
Product Code: SDF-INF-058
85g/m² Peel Ply: leaves a clean, textured surface suitable for secondary bonding.
No consumable works independently in a vacuum process. Temperature class, resin compatibility, vacuum level and other bagging layers must be verified together.
See the vacuum infusion consumables guide for the complete system.
For Peel ply fabric, the stated temperature and material are a starting point. Final use must be based on the current TDS, actual cure cycle and a small-scale process trial.
| Product type | Peel ply fabric |
|---|---|
| Primary function | Leaves a clean, textured surface suitable for secondary bonding. |
| Material / construction | polyamide (PA6) |
| Temperature class | 180°C (product rating; allow process margin) |
| Application processes | Vacuum infusion, prepreg and secondary-bond preparation |
| Technical document | Downloadable TDS/catalogue available on this page |
Secondary-bonding surfacesBefore paint and coatingsVacuum infusionPrepreg manufacturingComposite repair
Clearly defined process function
Selectable as part of the vacuum system
Traceable by technical product code
Suitable for sample and trial planning
Integrates into a complete consumables list
PEEL PLY
High-Performance Nylon 6 Peel Ply for Composite Applications The 210°C Heat Resistant Peel…