PEEL PLY
85g/m² Peel Ply
Peel ply suitable for composite part production, with 180°C heat resistance.
Product Code: SDF-INF-002
210°C Heat Resistant Peel Ply: leaves a clean, textured surface suitable for secondary bonding.
No consumable works independently in a vacuum process. Temperature class, resin compatibility, vacuum level and other bagging layers must be verified together.
See the vacuum infusion consumables guide for the complete system.
For Peel ply fabric, the stated temperature and material are a starting point. Final use must be based on the current TDS, actual cure cycle and a small-scale process trial.
| Product type | Peel ply fabric |
|---|---|
| Primary function | Leaves a clean, textured surface suitable for secondary bonding. |
| Material / construction | polyamide (PA6) |
| Temperature class | 210°C (product rating; allow process margin) |
| Application processes | Vacuum infusion, prepreg and secondary-bond preparation |
| Technical document | Request the current TDS before quotation |
Secondary-bonding surfacesBefore paint and coatingsVacuum infusionPrepreg manufacturingComposite repair
Clearly defined process function
Selectable as part of the vacuum system
Traceable by technical product code
Suitable for sample and trial planning
Integrates into a complete consumables list
PEEL PLY
Peel ply suitable for composite part production, with 180°C heat resistance.