SDF263AB-J Epoxy Resin

Name: SDF263AB-J Epoxy Resin
Brand: SDF Ticaret
SKU: SDF-EPO-025
Availability: InStock

EPOXY RESINS

Product Code: SDF-EPO-025

SDF263AB-J Epoxy Resin: Modified epoxy system with good flow and defoaming behaviour for vacuum infusion.

Why does it matter?

Epoxy selection must consider viscosity, pot life, mix ratio, exotherm, cure cycle and Tg as well as final strength. A TDS mix ratio specified by weight must not be measured by volume.

Application checklist

Store components in dry, clean conditions.
Weigh A and B accurately and mix homogeneously.
Control pot life and exotherm for the part mass.
Record cure temperature and time.
Trial a sample panel/part before serial production.

Compare alternatives in the resin selection guide.

Technical Details

The values above are typical or sales-specification data transcribed from the linked TDS. Use the current TDS/SDS, batch certificate and actual production trial together for design, safety and process decisions.

Technical Specifications

Mix ratio by weight	100:25
Part A viscosity at 25°C	1000–2000 (TDS unit)
Part B viscosity at 25°C	80–100 (TDS unit)
Pot life at 25°C / 100 g	15–20 minutes
Cure cycle	48 h at 25°C or 2–4 h at 70°C
Tg	120°C
Heat-resistance temperature	140–150°C
Water absorption	<1%

Areas of Use

Vacuum infusion

Composite moulding

Abrasive and decorative castings

Golf balls and mineral-filled products

Clear or pigmented applications

Advantages

Good flow

Defoaming behaviour

Polishable cured surface

High hardness and adhesion

Yellowing and solvent resistance

SDF263AB-J

Request a Quote In Stock

Ask on WhatsApp Call Now Download Technical Document

Quick Quote Request

S.S.S

Frequently Asked Questions

Which application suits SDF263AB-J Epoxy Resin?

Modified epoxy system with good flow and defoaming behaviour for vacuum infusion. Final suitability must be verified for resin/hardener system, part geometry, temperature and production trials.

What is most critical in mixing and curing?

The A:B ratio is 100:25 by weight. Weigh accurately, mix homogeneously and follow the time/temperature cycle in the TDS.

Is a trial required before serial production?

Yes. TDS values are typical laboratory data. Mass effect, exotherm, humidity, tooling and reinforcement/core compatibility must be validated by a small-scale trial.