+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

580ML Dual-Component Cartridge (3:1 Ratio)

580ML Dual-Component Cartridge (3:1 Ratio) CARTRIDGE

Product Code: SDF-CRT-017

580ML Dual-Component Cartridge (3:1 Ratio): 580 mL cartridge for storing 3:1 two-component materials separately and dispensing through a static mixer.

Why does it matter?

In a dual-component cartridge, A/B geometry, material chemistry, gun plunger and static-mixer connection matter as much as ratio.

Application and selection checklist

  • Verify cartridge volume and A/B system.
  • Check resin compatibility with PP/PBT.
  • Use a gun and mixer matching the ratio.
  • Set filling and storage conditions from the material TDS/SDS.

For product matching, samples and quotation, see the cartridge and dispensing-equipment selection.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Total volume 580 mL
Mix ratio 3:1
System Dual component
Compatibility check Gun, plunger and static mixer must be verified together

Areas of Use

Industrial production

Controlled application

Sample and serial-production validation

Advantages

Controlled application with the correct system

Repeatable process support

Technical matching capability

S.S.S

Frequently Asked Questions

Which application suits 580ML Dual-Component Cartridge (3:1 Ratio)?
580 mL cartridge for storing 3:1 two-component materials separately and dispensing through a static mixer. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products