+90 533 085 67 33 info@sdfticaret.com Monday - Friday: 09:00 - 18:00
TR EN
Contact Customer Login

SDF14167 MMA 5 MIN Adhesive

SDF14167 MMA 5 MIN Adhesive ADHESIVES

Product Code: SDF-ADH-029

SDF14167 MMA 5 MIN Adhesive: Five-minute two-component MMA structural adhesive for metals, engineering plastics and composites.

Why does it matter?

Adhesive selection must consider mix ratio, working time, surface preparation, bond gap and cure cycle—not chemistry alone.

Application and selection checklist

  • Remove oil, moisture, dust and weak layers from the surface.
  • Measure A:B using the weight/volume basis stated in the TDS.
  • Control pot life, part mass and exotherm together.
  • Trial the actual substrate before serial production.

For product matching, samples and quotation, see the technical supply and sampling process.

Technical Details

Technical values are transcribed from the linked manufacturer document or, where equipment has no TDS, from verifiable information in the product name. Use the current TDS/SDS, batch certificate and an actual production trial together for design and process decisions.

Technical Specifications

Mix ratio by weight 100:10
Mix ratio by volume 10:1
Pot life at 25°C / 100 g 3–5 minutes
Cure condition at 25°C / 2 g 5 minutes
Gap fill 6 mm
Mixed specific gravity 1.05
Aluminium 6061 lap shear at 23°C 17.1 MPa
Recommended dispensing temperature 1–35°C

Areas of Use

Metal and aluminium assembly

Bonding ABS, PC, PVC and acrylic

Polyester, vinyl-ester and epoxy composites

Rapid industrial assembly

Advantages

Rapid room-temperature cure

Self-priming effect on metal

High toughness and strength

Gap filling up to 6 mm

Minimal surface preparation

S.S.S

Frequently Asked Questions

Which application suits SDF14167 MMA 5 MIN Adhesive?
Five-minute two-component MMA structural adhesive for metals, engineering plastics and composites. Final suitability must be validated for substrate, process conditions and a small-scale trial.
What information should be supplied before ordering?
Provide substrate, production method, target temperature, part size, annual consumption and existing equipment details.
Are TDS values guaranteed design values?
No. Unless explicitly stated otherwise, they are typical values under manufacturer conditions; current TDS/SDS and batch documents take precedence.
Similar Products

Products You May Like

All Products